Baumatic oven

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Baumatic oven

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • March 6, 2006 at 10:33 am #16124
    iadom
    Moderator

    Customer just called, ringing from his office so has no model number. Apparantly has had someone in to clean his oven ❓ . now says that door outer glass is falling of. Anyone familiar with Baumatic, will this be a replacement or will it reseal with a suitable adhesive?

    March 6, 2006 at 10:47 am #167618
    Fairdeal
    Participant

    Re: Baumatic oven

    I had these problems beofre.I think when the guys who were cleaning the oven they took or tried to take the door off so that it was easy for them to clean.so it looks like just the hinges came off so you just have to put the outer door hinges in and lock it with the small catch that is on the door hing.
    Hope that helps.

    March 6, 2006 at 11:00 am #167619
    iadom
    Moderator

    Re: Baumatic oven

    Thanks for your reply, not to sure if that is the case here though, the customer has already tried to glue the panel back on, not to sure if he used a suitable heat resistant adhesive though.

    March 6, 2006 at 11:04 am #167620
    qas
    Participant

    Re: Baumatic oven

    Generally high temperature resistant silicon (labelled RTV in Australia) is suitable for repairing oven doors. Some Baumatic (if the Oz variations are the same) have the brackets glued to the glass and a strong solvent could loosen them.

    Steve

    March 6, 2006 at 11:11 am #167621
    iadom
    Moderator

    Re: Baumatic oven

    Jeepers mate, what time is it in Oz. I use Ambersil 108A High temp adhesive. looks like I may need the nail varnish remover to get of anything the customer has tried to use first. 😥

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.