trade access

Home › Forums › UK Whitegoods › Moderator/Site Admin Forum › trade access

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • March 6, 2006 at 2:35 pm #16133
    johnmac11
    Participant

    Am I reading this the right way up?
    How did this guy get trade access, looking at his post below he works in one of the sheds and has no or a very limited knowledge of the trade
    yet is giving out advice to the public

    Taken from the general trade forum in http://www.ukwhitegoods.co.uk/modules.p … ght=#73394

    macmini wrote:I’m an 18yr old currently working in a large whitegoods retailer, however, i’m interested in getting into the whites repair industry,Just wondered if anyone had any advice on how to go about this? Unfortunately, i don’t drive.

    In this post in the public forums http://www.ukwhitegoods.co.uk/modules.p … ght=#72996
    he wrote

    macmini wrote:check the motor? The ‘burning’ smell and red hot drum will be the element!

    and in this post http://www.ukwhitegoods.co.uk/modules.p … ght=#70200
    he wrote

    macmini wrote:Even though it were hot/cold fill, it’ll still have a heater, incase there’s no hot water! also, depending on the machine, most machines will use the heater for certain wash programmes.

    Am I missing something?


    John

    March 6, 2006 at 3:27 pm #167663
    Dave_Conway
    Participant

    Re: trade access

    It’s his advice to the public that concerns me, I PM’d him yesterday about the software thing as well as that so hopefully he’ll stop it.

    If he works in a store selling white goods and proves it he will have been given trade access, I have a feeling that he works for one of the other trade members but I can’t be 100{e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d} certain on it.

    Dave.

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.