fisher & paykel when agitator hit the sides

Home › Forums › Public Support Forums › International Forums › Australasian Appliance Forum › fisher & paykel when agitator hit the sides

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • March 8, 2006 at 10:13 am #16190
    silvercody
    Participant

    any suggesting on why the washing machine is hitting the sides when agitatoring its got the spring on, its worst when the level is low,is it out of balance how do u fix that, it washings normal and doen”t fault out..

    March 8, 2006 at 10:40 am #168754
    qas
    Participant

    Re: fisher & paykel when agitator hit the sides

    Check that the machine is reasonably level. The bowl hangs from the top so if the machine is leaning to one side, the bowl will be closer to one side than the other.
    Other causes could be worn springs on one or more of the suspension rods.

    March 8, 2006 at 11:15 am #168755
    silvercody
    Participant

    Re: fisher & paykel when agitator hit the sides

    have just repaced some sus rods has a new spring but still doing it is ther any thing more ,..could it be the obb swicth..

    March 8, 2006 at 10:00 pm #168756
    Penguin45
    Participant

    Re: fisher & paykel when agitator hit the sides

    Don’t think OOB is in circuit until spin sequences…. Motor running too fast in wash? Suspa rods not on correctly?

    Penguin45.

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.