whirlpool AWM 5125/5

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › whirlpool AWM 5125/5

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • March 9, 2006 at 12:46 pm #16232
    rocker
    Participant

    unable to start any programes machine starts drum turns no water in on any programe, feel this is a timer fault has anyone had same fault on this model.
    Cheers john

    March 9, 2006 at 1:25 pm #168920
    Dave_Conway
    Participant

    Re: whirlpool AWM 5125/5

    Open circuit pump or valve is likely as well, also double check the carbon brushes as they can cause odd faults on these when fairly well worn.

    Dave.

    March 9, 2006 at 4:07 pm #168921
    rocker
    Participant

    Re: whirlpool AWM 5125/5

    Cheers Dave, Will check these parts out, thanks for help.
    John.

    March 9, 2006 at 5:40 pm #168922
    MickGeorge
    Participant

    Re: whirlpool AWM 5125/5

    Not sure how old this model is but used to get open circuit pump wiring on the old models due to machine shaking which gave same type of fault.

    March 13, 2006 at 2:29 pm #168923
    rocker
    Participant

    Re: whirlpool AWM 5125/5

    Returned today done some more investigating, fault proved to be ( No postive line feed) from timer to hot inlet valve. so requires new timer.
    so thanks again Dave you were correct.
    John

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.