integrated undercounter fridge

Home › Forums › Public Support Forums › Help And Support › Fridge And Freezer Forum › integrated undercounter fridge

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • March 12, 2006 at 3:07 pm #16301
    klbmax1
    Participant

    We are fitting our new integrated undercounter Neff fridge into our new kitchen – it is at the end of the line of kitchen units so we aren’t sure how to attach the end panel [the panel that matches with the doors on our kitchen units] as there doesn’t seem to be anything on the side of the fridge that would allow us to do this. Help!

    March 12, 2006 at 3:16 pm #169196
    admin
    Keymaster

    Re: integrated undercounter fridge

    hi

    the only way you can do this is by using 45 degree plates to secure the panel to the worktop and also to the floor.end panels arent made to fit onto the side of appliances.

    also bear in mind that you will need to place all the appliances on solid wood secured to the floor 3″ x 2″ to allow removal if you are going to lay tiles or laminate after you have fitted your kitchen units.

    hope this helps

    bryan

    March 13, 2006 at 7:57 am #169197
    klbmax1
    Participant

    Re: integrated undercounter fridge

    Hi, thanks for the advice. The appliances are going onto wooden floorboards, which is the same flooring as the rest of the room, I hope this is OK?

    cheers

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.