FRIGIDAIRE R5303B Fridge.

Home › Forums › Trade Technical & Spare Parts Forums › Trade Spare Parts › FRIGIDAIRE R5303B Fridge.

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • March 17, 2006 at 5:05 pm #16450
    mike412
    Participant

    Afternoon All. I Trust you have all had a prosperous week.

    Can anyone help me with a Thermostat for this 4/5 cu ft under counter fridge with “moulded” ice box if you know what I mean. Capillary is fed through the insulation.
    Independent Services tell me the part number is 1401192, but they are out of stock, as are CDSL and Maddocks, Tried Masterpart website without success..

    Is there a Service stat which would definately fit?. ( I think the capillary would be too long on a VC1).

    Many Thanks,

    Mike.

    March 17, 2006 at 7:22 pm #169873
    BobHope
    Participant

    Re: FRIGIDAIRE R5303B Fridge.

    Hi Mike
    sorry but im at home now so cannot check the model.

    but is that not the fridge with a cold wall back panel and a seperate ice box if it has a drain hole on the back it a vt9 stat that fits you just have to be carefull and hide the capillary in the thermostat housing, its a tight fit but it does go.

    Bob.

    March 18, 2006 at 9:18 pm #169874
    mike412
    Participant

    Re: FRIGIDAIRE R5303B Fridge.

    Thanks for the response Bob.

    The fridge has a full width ice box with a door, The Thermostat and lamp housing is under the ice box with no visible capillary. I probably have little to loose by fitting a VT9 on a suck it and see basis as it will probably be a scrapper if I dont- its a cheap fridge.

    Cheers,

    Mike.

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.