Bosch washer enr:WFO2864GB/01

This topic has 4 replies, 3 voices, and was last updated 20 years ago by whitevanman.

Viewing 5 posts - 1 through 5 (of 5 total)

Author

Posts
March 17, 2006 at 6:41 pm #16453

whitevanman
Participant

Not heating – heater okay – no dry/blown joints on pcb

what should thermistor be reading at ambient ?

why has the pres sw got 4 wires (thinking 11-12-13 ?)

BSH Quoting £94 for pcb

any tips[/list]

March 17, 2006 at 8:10 pm #169882

Penguin45
Participant

Re: Bosch washer enr:WFO2864GB/01

whitevanman wrote:why has the pres sw got 4 wires (thinking 11-12-13 ?)

Flood protection.
Chris.

March 17, 2006 at 9:07 pm #169883

whitevanman
Participant

Re: Bosch washer enr:WFO2864GB/01

thanks for advise p45, is this known pcb fault then, do you know what thermistor values are,ptc or ntc type ? I know that hotpoint wm range heater thermistor works with whirlpool wm’s. (both same values).

thanks
wayne

March 17, 2006 at 10:16 pm #169884

gegsy
Participant

Re: Bosch washer enr:WFO2864GB/01

Hi
The NTC operating range is between –5 °C and 103 °C. If the NTC value is outside the operating range (e.g. interruption or short-circuit), the programme continues cold without an error display. The test programme displays “NTC short circuit” or “NTC interruption”. The NTC is inserted into the heating flange and is sealed with the heater seal. The NTC can be removed after desconnecting the heater. Temperature in °C
Resistance in kÎ©
10 – 8.5–10.6
20 – 5.4–6.5
30 – 3.5–4.3
40 – 3–2.9
50 – 1.5–1.9
60 – 1.1–1.3
66 – 0.9–1.1
86 – 0.45–0.55

Hope that helps

Greg

PS – NTC part number is 170961

March 17, 2006 at 11:14 pm #169885

whitevanman
Participant

Re: Bosch washer enr:WFO2864GB/01

thanks guys for the help

wayne
Author

Posts

Viewing 5 posts - 1 through 5 (of 5 total)

You must be logged in to reply to this topic.