Bosch KGU3200GB f/f – fridge not working.

Home Forums Public Support Forums Help And Support Fridge And Freezer Forum Bosch KGU3200GB f/f – fridge not working.

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • #16472
    lcsneil
    Participant

    Model No. KGU3200GB & FD number is FD7502. About 12 years old.

    Overnight the freezer rose to -12C but by the time I got up it was back to -18C – however during the day the fridge temp has started to rise (from 4C) to about 11C now and has been like that for about 8 hours.

    Have put the super freeze on the freezer but it doesnt get any cooler. The whole unit seems very quiet. No motor running. All that happens if I depower the whole unit is a ‘clunk’ noise on switch on (like a solenoid or valve closing/opening).

    Anyone any ideas what could be wrong? (Is this the infamous defrost circuitry?)

    If so where is the circuit board located and how do I get access to it?

    Is it worth repairing? Any ideas of cost?


    Neil

    #169947
    gegsy
    Participant

    Re: Bosch KGU3200GB f/f – fridge not working.

    Hi
    Without doing any checks myself, it sounds like the PCB (situated in top of fascia) part number 263782, around the £100 mark and will need Vat and p&p added. Use link below to locate.

    Greg

    #169948
    lcsneil
    Participant

    Re: Bosch KGU3200GB f/f – fridge not working.

    gegsy wrote:Hi
    (situated in top of fascia) part number 263782, around the £100 mark
    Greg

    So to get the board out does the top come off or is it a remove the main door then the face plate comes off?

    Neil

    #169949
    gegsy
    Participant

    Re: Bosch KGU3200GB f/f – fridge not working.

    2 screws hold top fascia, remove;and PCB is the one horizontally situated facing you. It just pulls out , no wire 😀

    Greg

    #169950
    lcsneil
    Participant

    Re: Bosch KGU3200GB f/f – fridge not working.

    OK further info – switched fridge back on over night and internal temp dropped from 21C (room temp) to 10C but no lower.

    Also if I switch off super freeze then the freezer temp starts to rise in the freezer compartement from -18C to -15C according to the display on the front.

    Mind you it doesn’t seem very cold in there and my digital thermometer says it’s only -3C.

    Seem to remember when I first got it something similar happened (done under guarantee) and involved changing a solenoid and re-pressurising the refrigerant!

    So apart from the PCB what else could it possibly be?

    Reason I ask is at £116 for just the board (and it might not be….) it’s temping to buy a new similar model (this time Siemens KG32U123GB) for only £250 more.

    Don’t suppose there is any diagnostic routine I can put the fridge in to give me some kind of additional clues as to what IT thinks isn’t working. (As you can do with other white goods?)

    Neil

    #169951
    gegsy
    Participant

    Re: Bosch KGU3200GB f/f – fridge not working.

    Hi
    Like I said without seeing the appliance impssible to tell.
    You could always use the engineer link below and get the PCB conmfirmed as faulty. These f/f have a good lifespan and quality, seemms a shame to write it off.

    Greg

Viewing 6 posts - 1 through 6 (of 6 total)
  • You must be logged in to reply to this topic.