Servis Caress 900 Dryer Problem

Home › Forums › Public Support Forums › Help And Support › Washing Machine Help Forum › Servis Caress 900 Dryer Problem

Viewing 8 posts - 1 through 8 (of 8 total)
  • Author
    Posts
  • March 18, 2006 at 5:29 pm #16473
    ukez
    Participant

    Hi all….

    Im just trying to find out why my washer dryer isnt drying anything, its staying cold, blowing cold air.

    My machine is a Servis Caress 900.

    Is there anything i can do, does this have a reset button somewhere like my old standalone tumble dryer?

    Your help will be greatly appreciated.

    Regards
    Ez

    March 18, 2006 at 5:45 pm #169952
    Penguin45
    Participant

    Re: Servis Caress 900 Dryer Problem

    ukez wrote:
    My machine is a Servis Caress 900.

    Your machine is an M9—…….. Check behind pump flap or around door opening surround for full number.

    There is a manual reset stat on top of the heater box, but why has it tripped? Blower motor running? Poor airflow? No condenser trickle of water?

    Power off before sticking fingers in :plug:

    Regards,
    Penguin45.

    March 18, 2006 at 5:53 pm #169953
    gegsy
    Participant

    Re: Servis Caress 900 Dryer Problem

    Hi
    Check wire off pressure switch and amp tag/burnt off wire to limiter rod stat at front right of dryer manifold 😉

    Greg

    March 18, 2006 at 6:41 pm #169954
    ukez
    Participant

    Re: Servis Caress 900 Dryer Problem

    Hi
    Check wire off pressure switch and amp tag/burnt off wire to limiter rod stat at front right of dryer manifold Wink

    Greg
    Are you talking about the white rectangle block bit with two spade terminals at the front of the machine just left of the main dials on the foiled air vent bit.


    I noticed one wire looks like it has come off of one of the spade terminals and the other seems to have been rubbing on something, any suggestions?

    It only seems to have rubbed on the plastic surrounding the female connection on the one that stayed on. I dont see any rubbing signs on the one that is disconnected, is this a normal thing for this machine greg?

    Thanks for your responses guys.

    March 18, 2006 at 6:48 pm #169955
    ukez
    Participant

    Re: Servis Caress 900 Dryer Problem

    Penguin..Yep its M9090.. thanks

    March 18, 2006 at 6:51 pm #169956
    gegsy
    Participant

    Re: Servis Caress 900 Dryer Problem

    ukez wrote:Are you talking about the white rectangle block bit with two spade terminals at the front of the machine just left of the main dials on the foiled air vent bit.


    I noticed one wire looks like it has come off of one of the spade terminals and the other seems to have been rubbing on something, any suggestions?

    It only seems to have rubbed on the plastic surrounding the female connection on the one that stayed on. I dont see any rubbing signs on the one that is disconnected, is this a normal thing for this machine greg?

    Thanks for your responses guys.

    Thats the one, re attach/replace spade and test. Should be fine.

    Greg

    March 18, 2006 at 7:06 pm #169957
    ukez
    Participant

    Re: Servis Caress 900 Dryer Problem

    Greg my friend you’re great, you’re a book of knowledge.

    Its working fine as you said it would so i can get back to my washing now. Its been a nightmare without that working this past two weeks as i live in a apartment with electric heating so i’ve had no where to hang my clothes.

    Thanks again you guys, you really are brilliant..very helpful.
    😉

    Happy Days!! 😀

    March 18, 2006 at 7:58 pm #169958
    gegsy
    Participant

    Re: Servis Caress 900 Dryer Problem

    No trouble at all.
    Happy washing 😀

    Greg

  • Author
    Posts
Viewing 8 posts - 1 through 8 (of 8 total)
  • You must be logged in to reply to this topic.