Testing Thermostat

Home › Forums › Public Support Forums › Help And Support › Washing Machine Help Forum › Testing Thermostat

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • March 21, 2006 at 9:33 pm #16552
    aahbarnes
    Participant

    My creda tumble dryer is not heating. I took the back off and after a few tests suspect the right hand thermostat above the heater. It has code 36FXE14 printed on the side. How should I test this? It has a resistance of 6.2Mohms at room temp. Thanks a lot.

    March 21, 2006 at 9:43 pm #170346
    Penguin45
    Participant

    Re: Testing Thermostat

    Thermostat should be normally closed, therefore resistance near as spit zero ohms.

    Without the model number I can’t advise which stat kit you will need, work it out from the link attached:

    http://www.ukwhitegoods.co.uk/modules.p … pic&t=5126

    They are all available from spares@ukwhitegoods.co.uk

    Power off at all times,
    Regards,
    Penguin45.

    March 21, 2006 at 10:08 pm #170347
    aahbarnes
    Participant

    Re: Testing Thermostat

    Thanks very much for the quick reply, sorry I forgot to include the model number, it is: 37482T001Q

    March 21, 2006 at 10:32 pm #170348
    Dave_Conway
    Participant

    Re: Testing Thermostat

    Then you need 1741124 HERE 🙂

    Dave.

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.