- This topic has 1 reply, 2 voices, and was last updated 20 years ago by
.
-
Posts
-
my bosch s 210 fills up with water and doesn’t know when to stop. I turn it on, it operates for a few minutes, filles up with water and the water keeps flooding in ’till it eventually floods out the door. If I keep an eye on it when i turn it on, I can turn the dial after about 2 minutes of filling to advance the cycle so it carries on and washes everything very well
I feel it’s probably the float valve (assuming this machine has one?) sticking so the machine doesn’t know that it’s got enough water in it and keeps on filling rather than advancing. I’ve never had a problem with this machine yet, I haven’t taken it apart to look.
I’d appreciate some idea of where to start before i stab around in the dark if anyone can help please?
Thanks
MCRe: Bosch s 210 over filling
The water level control system is located on the right hand side of the machine. The water chamber matrix and its hoses will need a thorough clean to cure this fault.
I strongly advise professional help (not a costly exercise 😉 ), therefore please click the link below 🙂
- You must be logged in to reply to this topic.