Hvr Tacho Magnet Avalibility

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Hvr Tacho Magnet Avalibility

Viewing 13 posts - 1 through 13 (of 13 total)
  • Author
    Posts
  • April 5, 2006 at 3:38 pm #16929
    MickGeorge
    Participant

    Hi folks

    Does Anyone know if you can still get the Tacho Magnet (origional cracked and loose) for a Quatro Motor Pt.No 91212357. Connect saying its obsolete but can supply Tacho kit Pt No. 91212340.

    According to their picture its only the coil asy. so does this mean it’s a new motor job? Or does anyone know different?

    Model No. just in case you need it is AS136

    Thanks

    April 5, 2006 at 4:04 pm #172217
    Dave_Conway
    Participant

    Re: Hvr Tacho Magnet Avalibility

    It is obsolete now yes, a new motor unless you can canibilise an old one.

    Better still, does anyone have an old motor they can whip the magnet off of ?
    😀

    Dave.

    April 5, 2006 at 4:39 pm #172218
    andy2
    Participant

    Re: Hvr Tacho Magnet Avalibility

    I have just changed one of these motors but i have found that the magnets are very difficult to get off without breaking. I will try and retrieve the old motor tomorrow and have a go.

    Andy

    April 5, 2006 at 8:49 pm #172219
    leavemetogetonwithit
    Participant

    Re: Hvr Tacho Magnet Avalibility

    Is it the P55 motor? I took one off yesterday; might be able to get tacho magnet next Tuesday.
    Mike

    April 5, 2006 at 8:56 pm #172220
    Dave_Conway
    Participant

    Re: Hvr Tacho Magnet Avalibility

    leavemetogetonwithit wrote:Is it the P55 motor?

    That’s the baby 🙂

    Dave.

    April 5, 2006 at 10:24 pm #172221
    leavemetogetonwithit
    Participant

    Re: Hvr Tacho Magnet Avalibility

    If there’s a rush on Seme have P55 at £44 presently.
    Mike.

    April 6, 2006 at 9:17 am #172222
    MickGeorge
    Participant

    Re: Hvr Tacho Magnet Avalibility

    Thanks for the help guys..

    Customer can’t wait and mulling over new motor option.. looks like they might be getting a new m/c so put magnet retreval on hold and might try and retreve a couple on next motors I change as they are no longer availible..

    Seems a dam shame people scraping a good working m/c because of small item that manifactures don’t or wont make avalible.. still that seems the nature of the bussiness these day’s 🙁

    Thanks for the help..

    April 6, 2006 at 10:52 am #172223
    andy2
    Participant

    Re: Hvr Tacho Magnet Avalibility

    No luck getting it off. It just broke into pieces. They are too brittle and too tight on the shaft. Little bar stewards.

    Andy

    April 6, 2006 at 8:28 pm #172224
    loopey
    Participant

    Re: Hvr Tacho Magnet Avalibility

    its still a listed part from hoover , will post the part num later, at home at the
    moment loopey

    April 6, 2006 at 8:30 pm #172225
    Penguin45
    Participant

    Re: Hvr Tacho Magnet Avalibility

    It’s still listed, if you order it, it’s obsolete……….
    As is the tacho coil. And the armature.

    Chris.

    April 6, 2006 at 8:44 pm #172226
    loopey
    Participant

    Re: Hvr Tacho Magnet Avalibility

    I had one posted out to me last week , will try to ask the girls on the parts
    desk to find out the part number . i did get one , i am ex hoover eng so
    i no them , also local to bolton ….. lol loopey

    April 11, 2006 at 10:58 am #172227
    tradesite
    Participant

    Re: Hvr Tacho Magnet Avalibility

    Taking the magnets off the hoover motor inevitably (had to look that one up in the dictionary) breaks them.
    If you have any old hotpoint 95 series motors, you can screw the old magnet off them, drill the right size hole in the middle and fit it to the hoover motor.
    I have done this several times without any problems.

    Cheers.

    Nigel.

    April 11, 2006 at 4:18 pm #172228
    Dave_Conway
    Participant

    Re: Hvr Tacho Magnet Avalibility

    Mick, is your customer for this called Harris by any chance ?

    PM for further details

    Dave.

  • Author
    Posts
Viewing 13 posts - 1 through 13 (of 13 total)
  • You must be logged in to reply to this topic.