- This topic has 2 replies, 2 voices, and was last updated 20 years ago by
.
-
Posts
-
I have a INDESIT WIDL 126 about 2 years old and out of warenty. About 3 months ago the main control board shorted out between tracks which in the end i could’nt repair so i got another. This was fitted and the machine ran like new untill now, once you turn the machine on it try’s to run a program for a moment after about 2 mins the machine stops and just fills and drains for 10 mins while this is happening the 2nd and 3rd green led’s flash and the main red flashes fast. I have checked the main board again and can’t see any signs of damage pls help thanx!
Re: INDESIT WIDL 126 Flashing error code and constantly fil
Problem with the water level sensor (Pressure switch) anti-flood operating. Check to ensure air hose and chamber to it are clear first before replacing the Pressure Switch 😉
Re: INDESIT WIDL 126 Flashing error code and constantly fil
Could you give a position of the water level sensor (Pressure switch) inside the machine as i am only a lowly sparky (cant handle all these sensors) there are a bank of somethings next to the water intake and there also is what i think is a pressure switch directly under the top of the w/dryer i have put air onto this and can feel/hear it is working 😯 p.s do you know where i can get a wiring digram for this unit.
- You must be logged in to reply to this topic.