- This topic has 4 replies, 3 voices, and was last updated 20 years ago by
.
-
Posts
-
I have an AEG deluxe electronic 506 vacuum cleaner which still works really well after 20 years but two plastic parts have recently snapped and I would like to replace them if possible.
One is on the two part extendable tube. Where the two parts join there is a clip which determines how long you want the extended tube to be and holds it in the extended position. I think its all part of the tube assembly. Distriparts tell me that the extendable tube is discontinued and its really hard to use the vacuum without this as the tubes just slide around.
The other is the connector which joins the hose to the machine where the hose clips into the socket on the machine – its all one part with the hose and I think I can get it from Distriparts but there doesn’t seem to be much point in replacing that unless I can sort out the extention tube too.
Any ideas ❓
Re: AEG vacuum cleaner parts
Hmm, found a few part numbers:
Hose coupling – 668076551
Telescopic tube assembly – 668900580Have a vague recollection that Electrolux tools and tubes fitted these?
Dave_Conway will be able to check the p/nos for you.
Regards,
Penguin45.Re: AEG vacuum cleaner parts
Penguin45 wrote:Dave_Conway will be able to check the p/nos for you.
If you could flip the cleaner over and post up the product code beginning Enr….. please 😀
Thanks.
Dave.
Re: AEG vacuum cleaner parts
The only label on the machine doesn’t seem to have a code starting Enr – it says:
Typ E BP 0136
618 342 902 028
240V~ 1100W 50Hz
Does this help?
Distriparts seemed to think that the hose part number would be 899 668 0869 733
- You must be logged in to reply to this topic.