Zanussi DWS919 No fill

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Zanussi DWS919 No fill

Viewing 9 posts - 1 through 9 (of 9 total)
  • Author
    Posts
  • April 10, 2006 at 8:16 pm #17044
    Simon46
    Participant

    Is there a conversion for PNC911833022 01 for IWMS (full of cheese). Or is it IWMS only. What is the part number please?

    Regards
    Simon

    April 10, 2006 at 8:27 pm #172695
    Penguin45
    Participant

    Re: Zanussi DWS919 No fill

    Looks like a whole kit of goodies Simon – p/no 1524624-03/6.

    Chris.

    April 10, 2006 at 9:57 pm #172696
    Simon46
    Participant

    Re: Zanussi DWS919 No fill

    Thanks Chris. Does it come with fitting instructions?

    S.

    April 10, 2006 at 10:07 pm #172697
    Dave_Conway
    Participant

    Re: Zanussi DWS919 No fill

    You won’t need any Simon, it’s just a case of swapping old for new on the ones I’ve done anyway 🙂

    Dave.

    April 11, 2006 at 6:42 am #172698
    Simon46
    Participant

    Re: Zanussi DWS919 No fill

    Excellent 😀 .

    Thankyou
    S.

    November 14, 2010 at 5:43 pm #172699
    leavemetogetonwithit
    Participant

    Re: Zanussi DWS919 No fill

    What’s IWMS? Is it fill matrix?
    I’ve got one of these giving me a headache. I tapped the valve and it worked for a week or two. Then went back with new valve when it failed again. Now a month later, I’ve got to go back for the same fault. 🙁
    Mike.

    November 14, 2010 at 9:45 pm #172700
    Grendal
    Participant

    Re: Zanussi DWS919 No fill

    Stands for intelligent water management system 🙂 yes its the fill matrix

    November 15, 2010 at 11:36 pm #172701
    leavemetogetonwithit
    Participant

    Re: Zanussi DWS919 No fill

    What a hassle they made access to that thing. Was pretty clean but pulled it off anyway and gave the partially blocked adjoining hoses a clean out. Couldnt remember which way round the pink vent(?) hose and the clear hose to the water valve went 😳 so put pink hose above as it was slightly longer and it seemed to work OK. Hopefully it’s all gonna be fine now. :cya:
    Mike.

    November 29, 2010 at 9:19 pm #172702
    leavemetogetonwithit
    Participant

    Re: Zanussi DWS919 No fill

    leavemetogetonwithit wrote:Hopefully it’s all gonna be fine now.

    Bah. No such luck. Message on AP today. No fill again. Time to give up?
    Mike.

  • Author
    Posts
Viewing 9 posts - 1 through 9 (of 9 total)
  • You must be logged in to reply to this topic.