Whirlpool G2PDWI

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Whirlpool G2PDWI

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • April 12, 2006 at 12:11 am #17079
    Penguin45
    Participant

    Went to this last Friday – cleaned out possibly the most gunked up pressure sensor I’ve ever seen, thus allowing it to detect that the system was draining. Customer has now rung back to say she’s got constant beeping at the cycle end, although the machine is running programme correctly.

    Any ideas?

    Chris.

    April 12, 2006 at 8:37 am #172898
    Dave_Conway
    Participant

    Re: Whirlpool G2PDWI

    The only fault that is not indicated to the customer is F0 which is the optical sensor failure (or covered in gunk ;))

    The cycle completes but the PCB selects the hottest wash available ignoring the sensor failure.

    Dave.

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.