- This topic has 4 replies, 4 voices, and was last updated 19 years, 12 months ago by
.
-
Posts
-
got a fairly new hvr hc6130m
customer puts it on no4 it gets half way into rinses then the timer stops the door lock switches off as if is at the end
some times will not spin
wondering if its the timer or the module which is a special
any ideas
cheers doppaRe: sticking hoover
Timer does weird and wonderful things on these. P/no 91201337, £13 from Masterpart, so cheap enough.
Chris.
Re: sticking hoover
….also the module is prone to connection problems especially the module plug to the door interlock at the bottom of the board. Always best to take module right off and reconnect having checked all the connector blocks 😉
Re: sticking hoover
Had one the other day which was playing up on the rinses, checked for the normal blockages, low insulation on heater, everything ok, so changed the timer, still no joy, ended being the main module.
In the future I will still try the timer first as they are cheap and fit a variety of models.
cheers.
- You must be logged in to reply to this topic.