BEKO WM1210 WK1 pump

Home › Forums › Trade Technical & Spare Parts Forums › Trade Spare Parts › BEKO WM1210 WK1 pump

Viewing 8 posts - 1 through 8 (of 8 total)
  • Author
    Posts
  • April 19, 2006 at 2:43 pm #17226
    iadom
    Moderator

    I need a pump or body for one of these, front mounted terminals, Copreci type bayonet fixing, three hose connections.

    Masterpart UN51105 & 2801100200 do not look as though they will be correct.

    April 19, 2006 at 4:47 pm #173406
    twiggy
    Participant

    Re: BEKO WM1210 WK1 pump

    im pretty sure part 2801100900 is the correct part.

    twiggy

    April 19, 2006 at 4:50 pm #173407
    twiggy
    Participant

    Re: BEKO WM1210 WK1 pump

    i gave you the part for the drain pump, do you want the one that comes with filter assy if so part number is 2801100300.

    twiggy

    April 19, 2006 at 8:09 pm #173408
    iadom
    Moderator

    Re: BEKO WM1210 WK1 pump

    Either number will do , many thanks.


    jim.

    April 19, 2006 at 10:07 pm #173409
    Dave_Conway
    Participant

    Re: BEKO WM1210 WK1 pump

    Complete pump/filter is part number 2801100400 for the three hole version 🙂

    Dave.

    April 19, 2006 at 10:19 pm #173410
    iadom
    Moderator

    Re: BEKO WM1210 WK1 pump

    Thanks Dave, this is quite a rush job, four year old Beko, family of six with two tumble dryers, another ISE sale is hanging on me sorting this one quickly, I have a two hose pump on the way, may just block off the small hose temporarily. 🙂

    Why do manufacturers need such long, useless part numbers, six digits within one model range is more than enough for anyone. 👿

    April 19, 2006 at 10:37 pm #173411
    Dave_Conway
    Participant

    Re: BEKO WM1210 WK1 pump

    It’s probably just the emergency drain off I would think, if you get stuck, let me know, SEME have the three way one in stock 🙂

    Dave.

    April 19, 2006 at 10:42 pm #173412
    iadom
    Moderator

    Re: BEKO WM1210 WK1 pump

    Its not a temp drain hose, it is like the one first shown on the early ISE, with a small branch hose linking into the grey plastic outlet hose. I would guess it may be an attempt to prevent suds lock ❓

  • Author
    Posts
Viewing 8 posts - 1 through 8 (of 8 total)
  • You must be logged in to reply to this topic.