zan TD stat

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › zan TD stat

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • April 19, 2006 at 4:05 pm #17228
    abbots
    Participant

    zan TC7102W
    916092502/00

    need part no for thermostat on the plastic front ducting plate at the top.
    possible connect no. 5031686712746.

    what’s the easiest way of changing this stat?
    does the front of the machine come off,is so how?
    if not,is it a drum out job?
    thanks.
    john

    April 19, 2006 at 7:36 pm #173415
    aqualectric
    Participant

    Re: zan TD stat

    Yep’ that’s the one! Fits above the door in the front plastic moulding holding the filter.
    There is a plastic plate holding the stat in place with 2 screws – remove these and the stat should come out with a bit of persuasion with a screwdriver ( it is a very snug fit in the hole). Replacement is a reversal of removal ( to quote a Haynes manual!!). Sometimes a mirror can help. 😉
    Steve

    April 19, 2006 at 9:06 pm #173416
    abbots
    Participant

    Re: zan TD stat

    thanks steve,
    but how do you get to the 2 screws?is it best to remove the drum or does the front of the machine come off?
    john

    April 19, 2006 at 9:25 pm #173417
    Flyman
    Participant

    Re: zan TD stat

    2 screws are removed from inside the drum. You will probably get a stiff neck but you can actually get your head in and see them. 😉 The stat wires are long enough for the stat to come into the drum a few inches to be changed over to the new one.

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.