indesit d/w

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › indesit d/w

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • April 22, 2006 at 9:03 am #17294
    johnboy
    Participant

    Not filling or starting prog. 3 indicator lamps on left of control panel of which 1st & 3rd flashing (I assume indicating a fault code) Any ideas guys!! Your help much appeciatted (Info as passed from client, not visited yet, model unknown)

    April 22, 2006 at 10:18 am #173687
    Dave_Conway
    Participant

    Re: indesit d/w

    Without the model number it will be pretty difficult to check but if you read through the known error codes thread in this forum, the answer will be in there 🙂

    Dave.

    April 27, 2006 at 12:21 pm #173688
    johnboy
    Participant

    Re: indesit d/w

    model number is IDL705,

    April 27, 2006 at 1:06 pm #173689
    Dave_Conway
    Participant

    Re: indesit d/w

    That has a Bit100 control card in it, from the known error codes:

    dishwasher fault codes with bit 100 pcb(written on serial no)
    led1=overflow water in base
    led2=inlet valve
    led3=hermister
    led4=timeout heating
    1+2timeout draining
    2+3timeout filling
    1+3filters blocked
    1+4software error
    2+4heater
    3+4timer hardware

    Dave.

    April 27, 2006 at 4:24 pm #173690
    johnboy
    Participant

    Thanks for your help Dave

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.