hotpoint WMA30 (Broken drum paddle)

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › hotpoint WMA30 (Broken drum paddle)

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • April 24, 2006 at 2:00 pm #17337
    rocker
    Participant

    Have a broken drum paddle on this machine, to replace a new one, do they just slide into slots and lock in, cant see any screw holes ect !!!

    thanks john

    April 24, 2006 at 3:36 pm #173851
    Dave_Conway
    Participant

    Re: hotpoint WMA30 (Broken drum paddle)

    Yep, they just slot in 🙂

    Make sure you order the right one though, there’s 2/3 versions for this model.

    Dave.

    April 24, 2006 at 3:45 pm #173852
    rocker
    Participant

    Re: hotpoint WMA30 (Broken drum paddle)

    Cheers Dave..

    April 26, 2006 at 8:52 am #173853
    Seamy
    Participant

    Re: hotpoint WMA30 (Broken drum paddle)

    To remove old ones you need to push down a small screwdriver into the 3rd (me thinks) hole from the fromt to release the lolding clip. They should then release by pulling towards you.

    April 26, 2006 at 11:59 am #173854
    rocker
    Participant

    Re: hotpoint WMA30 (Broken drum paddle)

    Thanks Seamy..will note this, didnt know how to release these…always learning..
    Cheers John..

    April 26, 2006 at 6:06 pm #173855
    wilf
    Participant

    Re: hotpoint WMA30 (Broken drum paddle)

    three types

    1 holes on top different size you need spccial tool to fit

    2 holes on top all same size clip on

    3 holes on top all same size clip on has three pips on the end

    wilf

  • Author
    Posts
Viewing 6 posts - 1 through 6 (of 6 total)
  • You must be logged in to reply to this topic.