DIPLOMAT ADP8242 D/W

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › DIPLOMAT ADP8242 D/W

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • April 27, 2006 at 2:14 pm #17435
    mbdas
    Participant

    Hi 🙂
    can any tell what this fault code is looking from left to right
    LEDs 1,2,3 are flashing LED 4 is not lit and LED5 is lit but not flashing ❓
    if you set a rinse programme the machine fills and empties as normal at the start of the programme but when it goes to fill up properly water fills just over filter and beeps and this code is up.Any advice please

    thanks Mark

    April 27, 2006 at 2:43 pm #174332
    Dave_Conway
    Participant

    Re: DIPLOMAT ADP8242 D/W

    It’s a Smeg Mark, in the known error codes here:

    http://www.ukwhitegoods.co.uk/modules.p … 0&start=45

    Almost like the E7 fault but with the 5th LED on 😕

    You could try resetting it or possibly the dispensor solenoid at fault.

    Dave.

    April 27, 2006 at 9:01 pm #174333
    mbdas
    Participant

    Re: DIPLOMAT ADP8242 D/W

    thanks again dave 🙂 can you tell me how to reset the machine 😳
    thanks mark

    April 27, 2006 at 10:17 pm #174334
    Dave_Conway
    Participant

    Re: DIPLOMAT ADP8242 D/W

    Forum search > “smeg and reset” 😀

    Dave.

    April 27, 2006 at 10:30 pm #174335
    mbdas
    Participant

    Re: DIPLOMAT ADP8242 D/W

    Thanks dave 😳 😳
    seems a common problem I go back after the bank hol and try that 🙂

    May 1, 2006 at 12:31 pm #174336
    mbdas
    Participant

    Re: DIPLOMAT ADP8242 D/W

    Thanks Dave 😀
    Ive been back this morning and reset it 🙂 and away it went ,customer well impressed.
    have one on me :beer:
    Mark

  • Author
    Posts
Viewing 6 posts - 1 through 6 (of 6 total)
  • You must be logged in to reply to this topic.