zan fle1416w

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › zan fle1416w

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • May 2, 2006 at 4:08 pm #17523
    pmb
    Participant

    Can anyone help, sometimes it stops with the following lights flashing
    pre wash. rinse.rinse hold.end( bottom light). their ARE 8 lights on this model
    Any ideas 😕

    May 2, 2006 at 4:26 pm #174691
    funkyboogy
    Participant

    Re: zan fle1416w

    is it the model with the 8 lights running down the right hand side of control panel….if so what lights are on,,from 1st light at top tp 8th at bottom…
    cheers ally

    May 2, 2006 at 7:14 pm #174692
    pmb
    Participant

    Re: zan fle1416w

    From the top,1.3.4.8

    May 2, 2006 at 9:29 pm #174693
    funkyboogy
    Participant

    Re: zan fle1416w

    E71 FAULT…
    fault guide states ” ntc wash sensor faulty, voltage not within limits =short circuit or open…

    as with all zanussi w/m,s its probaly the pcb thats faulty, but may be worth trying ntc, or looking for loose wires…
    cheers ally

    May 6, 2006 at 4:02 pm #174694
    pmb
    Participant

    Re: zan fle1416w

    Thanks Funky, I have changed water valve and thermister, from spare machine,takon it back today after severel test washes,
    would have replied sooner but my broadband has been playing up,
    it was all down to a new phone i connected. 8)

    May 7, 2006 at 7:27 am #174695
    funkyboogy
    Participant

    Re: zan fle1416w

    thanks for update pmb..
    hopefully this will help with future E71 faults..
    ally

  • Author
    Posts
Viewing 6 posts - 1 through 6 (of 6 total)
  • You must be logged in to reply to this topic.