Siemens SE20792GB/09

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Siemens SE20792GB/09

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • May 4, 2006 at 9:53 am #17575
    don
    Moderator

    Have a customer who has a problem with the above dishwasher, in as much that glasses have grit deposits left on them after they have used the “auto” programme, but they are okay if any other programme used. They are using good old 4 in 1 tablets and rinse aid too. We advised them only to use powder only and the rinse aid. They have tried this but to no avail.

    All the usual things have been checked ie blockages, spray arms, etc. filling okay,Plumbing not changed, waste not moved.

    Any ideas anyone?
    Is it worth trying a service type wash to flush any excesses through?

    Thanks

    Don

    May 4, 2006 at 10:41 am #175341
    gegsy
    Participant

    Re: Siemens SE20792GB/09

    Hi Don
    If its only on the “auto” prog, I would say its all down to a fault in the turbidity section. Either faulty sensor 175340 or PCB 483682 or gunge around sensor.

    Regards
    Greg

    May 4, 2006 at 11:30 am #175342
    don
    Moderator

    Re: Siemens SE20792GB/09

    Thanks Greg :tup: I`ll pass the info on to the engineer.

    Don

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.