HOTPOINT BFI680 D/WASHER

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › HOTPOINT BFI680 D/WASHER

Viewing 9 posts - 1 through 9 (of 9 total)
  • Author
    Posts
  • May 5, 2006 at 12:09 am #17599
    DAR01
    Participant

    Anyone know the fault codes for this machine please?

    Mike

    🙁 🙁 🙁

    May 5, 2006 at 8:35 am #175391
    Dave_Conway
    Participant

    Re: HOTPOINT BFI680 D/WASHER

    It’s has a Bit100 card in it Mike, page 2 of the known eror codes half way down 🙂

    Dave.

    May 5, 2006 at 10:18 pm #175392
    DAR01
    Participant

    Re: HOTPOINT BFI680 D/WASHER

    Went to this one today built in controls inside door.

    7 leds on right hand side of the door.

    Do they number left to right or right to left.

    Mike

    May 6, 2006 at 7:56 am #175393
    Martin
    Participant

    Re: HOTPOINT BFI680 D/WASHER

    DAR01 wrote:Do they number left to right or right to left.

    Always left to right Mike 😀

    Unless it comes from China :martin:

    May 8, 2006 at 9:50 am #175394
    DAR01
    Participant

    Re: HOTPOINT BFI680 D/WASHER

    As there are 7 leds on this machine do the error codes only use the last 4 leds, unless I’ve missed something the HPT error codes I’ve seen only list 4 leds?

    Mike 🙁 🙁 🙁

    May 8, 2006 at 4:04 pm #175395
    iadom
    Moderator

    Re: HOTPOINT BFI680 D/WASHER

    Led’s four to seven are used for the error codes on this machine.

    However, just having a quick check they don’t appear to coresspond exactly with the 100 bit codes in lotusrays post.

    Let me know which lights are flashing, I will try to sort out the info ASAP

    BFI 62 & BFI 68 both appear to have slight variations.

    I have now done a small edit on lotusrays post to include 7 led machines. HTH.

    Jim.

    May 8, 2006 at 5:02 pm #175396
    DAR01
    Participant

    Re: HOTPOINT BFI680 D/WASHER

    Thanks Jim its 5 and 7 that are flashing.

    Mike

    May 8, 2006 at 5:08 pm #175397
    iadom
    Moderator

    Re: HOTPOINT BFI680 D/WASHER

    Should have guessed really, heater faulty, very common on these Indesit clones. 😥

    Check your e-mails BTW. 😉

    May 8, 2006 at 5:26 pm #175398
    DAR01
    Participant

    Re: HOTPOINT BFI680 D/WASHER

    Thanks again, didn’t fancy taking this machne out until I had some idea on what the fault might be.

    Mike 😆 😆 😆

    ps I think there is someone in the Public Dishwasher forum who has the same problem,no one has posted a reply to it yet though.

  • Author
    Posts
Viewing 9 posts - 1 through 9 (of 9 total)
  • You must be logged in to reply to this topic.