widl146uk indesit w/d

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › widl146uk indesit w/d

Viewing 9 posts - 1 through 9 (of 9 total)
  • Author
    Posts
  • May 10, 2006 at 7:29 pm #17720
    hilly
    Participant

    when i first went to this machine the door interlock had shorted and blown the tracking on the module ive replaced the interlock and had the module repaired by emw. now the machine fills and washes ok then i can reset it but when i put it on drain or spin it just sits there for about 30 secs then starts filling again i had to turn it off at the mains to stop it.
    any ideas im going back tomorrow for another bash at it

    thanks paul

    May 15, 2006 at 7:53 pm #175928
    hdltd
    Participant

    Hi Paul
    Make sure emw have put e prom in correctly as sometimes the pins miss the holders
    Is the lights flashing for a faults code??
    let me know
    John

    May 16, 2006 at 8:58 pm #175929
    hilly
    Participant

    Re: widl146uk indesit w/d

    thanks for reply ive just got the module back from emw i sent it back for them to check but it all works ok on their test rig so im going back again tomorrow to scratch my head again (i was advised it could be an edge connector problem and was told to tighten the pins but this didnt work) its bound to be something simple im missing after all you dont get any more basic than an indesit. i will let u know if i solve it


    thanks paul

    June 26, 2006 at 9:15 pm #175930
    hilly
    Participant

    Re: widl146uk indesit w/d

    just to let you all know im still on with this one ive had a couple of other engineers look at it cos i thaught im going mad they seem to think its a module fault as well one of them has had a module on order for a hotpoint which apparently there is a replacement module which fits most of the ranges now his & mine both change to this one which im hoping to try on my machine but everywhere seems to be out of stock i spoke to indesit last week they think it could be another couple of weeks till they are in stock. does anyone know if these boards have to be programed to fit different models or is it a straight swap? heeelllp pls


    thanks paul; 🙁

    June 26, 2006 at 9:32 pm #175931
    Dave_Conway
    Participant

    Re: widl146uk indesit w/d

    Part number is now C00091907 the only place that have them in stock that I can tell (showing 7) is Homespare:

    http://www.homespare.com at around £55

    Dave.

    June 26, 2006 at 9:34 pm #175932
    Dave_Conway
    Participant

    Re: widl146uk indesit w/d

    I should have mentioned, it comes with no Eeprom and you’ll need an account to order if you don’t have one….

    Dave.

    June 27, 2006 at 9:10 pm #175933
    hilly
    Participant

    Re: widl146uk indesit w/d

    cheers dave got module ordered today eeprom on back order


    thanks paul

    June 29, 2006 at 4:03 pm #175934
    nigegt
    Participant

    Re: widl146uk indesit w/d

    A pint to celebrate? 😆

    Nige

    July 10, 2006 at 7:48 pm #175935
    hilly
    Participant

    Re: widl146uk indesit w/d

    got new module and eeprom machine worked great it cant of liked the old repaired module cheers nige owe u a couple of beers now 😆


    paul

  • Author
    Posts
Viewing 9 posts - 1 through 9 (of 9 total)
  • You must be logged in to reply to this topic.