Hotpoint TDC30 T/dryer

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Hotpoint TDC30 T/dryer

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • May 12, 2006 at 1:08 pm #17770
    andy2
    Participant

    Hi

    Has anyone got a circuit diagram for this m/c please. It is not heating but heater, rear stat and cutout and front stat are all OK.

    I suspect the timer (unless someone has another suggestion) but need to know the heater in/out connections (or wire colours) to check it out.

    Thanks

    Andy 😀

    May 12, 2006 at 1:39 pm #176286
    silverbroom
    Participant

    Re: Hotpoint TDC30 T/dryer

    Hi Andy,
    Once I had a similar problem, heater and cut out/thermostat including front one checked out ok for continuity so was a bit stumped, decided to remove rear thermo and discovered it was concave so fitted new kit prob solved, have you actually removed the stats for a look?.


    Victor

    May 12, 2006 at 4:01 pm #176287
    iadom
    Moderator

    Re: Hotpoint TDC30 T/dryer

    Check your e-mails Andy. 😉

    Jim.

    May 12, 2006 at 10:32 pm #176288
    andy2
    Participant

    Re: Hotpoint TDC30 T/dryer

    Thanks very much for that Jim, very much appreciated.

    Victor i will check that out. thanks

    Andy 😀 😀 😀

    May 13, 2006 at 6:39 am #176289
    funkyboogy
    Participant

    Re: Hotpoint TDC30 T/dryer

    if this is a condesor dryer, check float switch hasnt stuck on the up position….filter light normaly on if this is the case
    ally

    May 14, 2006 at 6:10 pm #176290
    andy2
    Participant

    Re: Hotpoint TDC30 T/dryer

    Thanks for your help everyone, it appears the problem is the contacts in the timer

    Andy 😀

  • Author
    Posts
Viewing 6 posts - 1 through 6 (of 6 total)
  • You must be logged in to reply to this topic.