WMA31S module track blown.

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › WMA31S module track blown.

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • May 15, 2006 at 8:06 am #17817
    Simon46
    Participant

    Got a bearing job to do on this model 81147627 but the track is blown on connector X1 pin5.(no drum rotation) Does this mean i need a new motor as well or is it water leakage from rear of tub. Loom rub is not apparent. Meter tests on motor are o.k.

    Regards
    Simon

    May 15, 2006 at 11:41 am #176512
    timdowning
    Participant

    Re: WMA31S module track blown.

    Can you not re-solder / link wire the blown track? Give this a try before you entertain the bearing replacement. If still no drum action and the motor and wiring are ok must be module.

    May 16, 2006 at 5:18 pm #176513
    Simon46
    Participant

    Re: WMA31S module track blown.

    Resoldered track testing ok.On to a winner or so i thought. Fitted rear tub, tightening top block bolts and crack.
    Rear LHS bolt has cracked rear blue tub housing. 👿 😥

    S.

    May 16, 2006 at 7:21 pm #176514
    timdowning
    Participant

    Re: WMA31S module track blown.

    Why is there always a negative to a positive. Just when you think your getting somewhere. Some jobs are never destined to be completed, (with a profit).

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.