DOOR LOCK WMA 9

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › DOOR LOCK WMA 9

Viewing 10 posts - 1 through 10 (of 10 total)
  • Author
    Posts
  • May 15, 2006 at 3:33 pm #17825
    flash
    Participant

    HI
    I WENT TO A JOB TODAY ON A WMA9 HOTPOINT FIRST EDITION THE PROBLEM IS THE DOOR WONT LOCK I CHANGED THE INTERLOCK STILL THE SAME . CONTANUITY FROM DOOR TO BOARD OK SO CHANGED THE BOARD STILL THE SAME ANY IDEAS ❓

    GLEN

    May 15, 2006 at 4:01 pm #176538
    iadom
    Moderator

    Re: DOOR LOCK WMA 9

    CAPS Lock off please. 😉

    Have you tried the door lock by depressing the actuator with a probe or something similar, or lifting the door lock out of the machine whilst connected and depressing the switch?

    The door latch spring is prone to breaking and although it appears to be working will not have enough power to close the switch.

    Part number, 1603332.

    May 15, 2006 at 4:13 pm #176539
    flash
    Participant

    Re: DOOR LOCK WMA 9

    yes i have removed lock and moved slider to energize lock still no difference,light still flashing. glen

    May 15, 2006 at 4:21 pm #176540
    timdowning
    Participant

    Re: DOOR LOCK WMA 9

    Take pcb off machine and look for blown track. Link blown track, look for dodgy wires before testing machine. (Remember the door lock may have been the culprit initially).

    May 15, 2006 at 4:25 pm #176541
    iadom
    Moderator

    Re: DOOR LOCK WMA 9

    I will e-mail you the component test diagnostics.

    They will be for the WMA22 & WMT02, but they have the same control module with Vogue 2 controls.

    I have had a quick look and they appear to be the same. WMT02 look to be your best bet.

    Jim.

    May 15, 2006 at 11:29 pm #176542
    flash
    Participant

    Re: DOOR LOCK WMA 9

    hi

    thanks fore e/mail iI am going back tommorow to sort it out it must be a harness fault . thanks for the diagrams will take them with me the service manual ive got is for wma 10 & 11 and did not cover wma9

    glen

    May 16, 2006 at 7:11 am #176543
    Martin
    Participant

    Re: DOOR LOCK WMA 9

    WMA9?…WMA10?….????

    May 16, 2006 at 8:47 am #176544
    iadom
    Moderator

    Re: DOOR LOCK WMA 9

    WMA9 has its own manual but it uses the same module and is a Vogue 2 model as are WMA 10/11/13. So the basic test routine should be the samw, at least it is something to work with until you invest in a £16.00 manual for a one off model. 😥

    May 16, 2006 at 2:37 pm #176545
    Martin
    Participant

    Re: DOOR LOCK WMA 9

    But the’re not listed on Partfinder?

    May 16, 2006 at 4:25 pm #176546
    iadom
    Moderator

    Re: DOOR LOCK WMA 9

    Yes they are, it is just another glitch in the Partfinder disc. Initially if you select WMA9 and try to view parts it comes up as under construction, If you enter WMA9, then click on the drop down parts list, select CONTROLS then highlight either of the two programme knobs then click on View Drawing, all is revealed. 🙂

    It only shows a couple of pages but I guess those are the only ones that differ from the WMA10 etc.

  • Author
    Posts
Viewing 10 posts - 1 through 10 (of 10 total)
  • You must be logged in to reply to this topic.