Beko DWD5410 Wash program stops

Home › Forums › Public Support Forums › Help And Support › Dishwasher Help Forum › Beko DWD5410 Wash program stops

Viewing 9 posts - 1 through 9 (of 9 total)
  • Author
    Posts
  • May 16, 2006 at 8:32 am #17841
    roadster
    Participant

    I bought a second hand Beko DWD5410 which worked fine for 4 washes then halted mid program leaving wet dishes/not pumped out.

    After resetting the machine the following happens….

    Press Start button,
    Water flows into machine
    Nothing! Just sits there with the Wash light on, doesn’t heat up, doesn’t wash, doesn’t open the powder dispenser.

    Any help appreciated.

    Excellent forum by the way

    May 17, 2006 at 7:47 am #176592
    roadster
    Participant

    Re: Beko DWD5410 Wash program stops

    Anybody? Before I call an engineer…..

    Any help appreciated as it sounds like something relatively simple. The machine has only done 5 or 6 cycles so it can’t be build up of deposits or anything like that.

    Thanks

    May 17, 2006 at 8:57 am #176593
    Dave_Conway
    Participant

    Re: Beko DWD5410 Wash program stops

    Can you check the model number please, BWD5410 or even BDW5410 (tried both) aren’t correct 😉

    Dave.

    May 17, 2006 at 10:39 am #176594
    roadster
    Participant

    Re: Beko DWD5410 Wash program stops

    Dave_Conway wrote:Can you check the model number please, BWD5410 or even BDW5410 (tried both) aren’t correct 😉

    Dave.

    Definately DWD5410 on the front of the machine

    http://www.beko.co.uk/default.asp?docId=12664&productGroupId=15331

    May 17, 2006 at 12:05 pm #176595
    Dave_Conway
    Participant

    Re: Beko DWD5410 Wash program stops

    Hmm, pretty new model then with no technical information on it 🙁

    Engineer time I think to be honest..

    Check the repairs@ link below 🙂

    Dave.

    May 17, 2006 at 12:33 pm #176596
    roadster
    Participant

    Re: Beko DWD5410 Wash program stops

    OK, will do.

    Thanks anyway.

    May 19, 2006 at 8:42 am #176597
    roadster
    Participant

    Re: Beko DWD5410 Wash program stops

    I placed an engineer call via the repairs@ service but so far no response from the (West Midlands!?) company. I called the Beko Service number which routed through to a Leicester based Company but they could only offer an appointment in June 😯 .

    Can anyone recommend a local (Leicester / Market Harborough) company?

    Is there a generic “How a dishwasher works” explanation anywhere? I used to be a computer engineer, so not afraid of getting into electro / mechanical devices

    PS After inadvertently leaving the machine switched on I noticed that the wash cycle does actually end, although no wash action occurs.

    May 19, 2006 at 9:23 am #176598
    Dave_Conway
    Participant

    Re: Beko DWD5410 Wash program stops

    roadster wrote:I placed an engineer call via the repairs@ service but so far no response from the (West Midlands!?) company.

    Can you forward the repairs@ email to me please if you don’t get a reply by the end of today. although normally 48 hours should be allowed 🙂

    roadster wrote:Is there a generic “How a dishwasher works” explanation anywhere? I used to be a computer engineer, so not afraid of getting into electro / mechanical devices

    Haynes dishwasher manual, from your local library, nothing online that I am aware of to be honest.

    Dave.

    July 17, 2006 at 12:58 pm #176599
    roadster
    Participant

    Re: Beko DWD5410 Wash program stops

    Diagnosed faulty control pcb. On back order with BEKO for about a month now 👿

    Ah well, at least it didn’t work long enough for me to get used to not washing up by hand ❗

  • Author
    Posts
Viewing 9 posts - 1 through 9 (of 9 total)
  • You must be logged in to reply to this topic.