zanussi fjdr 1466w

Home › Forums › Public Support Forums › Help And Support › Washing Machine Help Forum › zanussi fjdr 1466w

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • May 22, 2006 at 11:32 am #17973
    bigred
    Participant

    hi guys

    i would like to say what a fantastic site this is the information is endless
    & solved me loads of problems. 8)

    but i need help on this one, zanussi fjdr 1466w.

    problem.

    the jet system pump had burned out bigtime now as soon as you power
    up the drain pump is running,
    the programs can still be set but will not run as the pump is still going
    no error codes show.

    would you think its gone into a shutdown mode or blown a chip,? no tracks blown on the boards.

    thanks

    May 22, 2006 at 1:25 pm #177258
    Dave_Conway
    Participant

    Re: zanussi fjdr 1466w

    The faulty pump has damaged the control PCB by the sound of it 🙁

    There is no component level information so a replacement PCB is the only option if that is the case (£90 ish).

    Power off when checking please :zap: or check the repairs@ link below 🙂

    Dave.

    May 22, 2006 at 2:54 pm #177259
    bigred
    Participant

    Re: zanussi fjdr 1466w

    thanks dave 😉

    May 24, 2006 at 9:41 pm #177260
    paul_wrx
    Participant

    Re: zanussi fjdr 1466w

    Hi,
    I’ve seen this once or twice before. Usually caused by a triac fault on the main pcb (tiny so hard to see). Try disconnecting the faulty recirculation pump (appliance unplugged!) and see if the appliance runs okay without it. I suspect that the pcb will be blown though, although there is a built in safety drain feature for some faults where the pcb runs the drain pump when an error is detected!

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.