Neff tumble dryer prob r4381 x1 gb/01

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Neff tumble dryer prob r4381 x1 gb/01

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • May 24, 2006 at 6:37 pm #18044
    den
    Participant

    I thought tumble dryers were simple. Neff doesnt think so.

    I went to a neff r4381x1gb/01. Its got more buttons on it than the space shuttle.
    Anyway, It goes for about two minutes, tumbles and heats. then digital timer goes to 0 and it stops.
    Gives one turn about a minute later.
    Big module on rh side. humidy sensor thing. Ive not got a clue on this one.
    Dont think its connected but cust says its got noisier recently. Fans seem ok and tight, but its rumbly. Anyone any clues.
    Thanks in advance.

    May 24, 2006 at 7:22 pm #177504
    BSH-MAN
    Participant

    Re: Neff tumble dryer prob r4381 x1 gb/01

    Are you testing on sensor dry without any load?

    May 24, 2006 at 8:49 pm #177505
    Kentish
    Participant

    Re: Neff tumble dryer prob r4381 x1 gb/01

    Agree you need damp clothes for it to keep going. Always a good idea to check the condenser matrix too.

    May 24, 2006 at 9:15 pm #177506
    gegsy
    Participant

    Re: Neff tumble dryer prob r4381 x1 gb/01

    Also make sure the paddles have no coating build up from softner usage.

    Greg

    May 25, 2006 at 12:13 pm #177507
    superfix
    Participant

    Re: Neff tumble dryer prob r4381 x1 gb/01

    If all the above are ok, check the hose from the pump to the water container for fluff.

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.