Ariston AVSL 100X, 2 + key flashing error code

Home › Forums › Public Support Forums › Help And Support › Washing Machine Help Forum › Ariston AVSL 100X, 2 + key flashing error code

Viewing 7 posts - 1 through 7 (of 7 total)
  • Author
    Posts
  • May 30, 2006 at 11:30 am #18150
    uk_sojourn
    Participant

    The machine shows the middle top and middle 3rd button flashing along with the key light.

    It starts to run takes water, agitates, takes more water, agitates, then dumps and drain pump keeps running.

    Filter is clear. Motor spins ok and drum turns ok. Pressure switch hose blown through ok, and pressure switch clicks ok. pressing the OFF button does not switch off the machine once fault is activated.

    It is necessary to unplug the machine to clear the fault. once reconnected the on/off works fine.

    Your thoughts please gents!

    May 31, 2006 at 3:34 pm #177930
    iadom
    Moderator

    Re: Ariston AVSL 100X, 2 + key flashing error code

    Are you sure about that model number, is that taken from the rating plate or near the barcode labels on the back?

    AVSL 100X not recognised on UK models list that I have. 😕

    June 1, 2006 at 5:22 pm #177931
    uk_sojourn
    Participant

    Re: Ariston AVSL 100X, 2 + key flashing error code

    No, its a french model, its a half depth machine.
    Soap door on left, then two rows of buttons with led’s beside them, (for start time delay settings), then the power button and a start button below that and finally on the right a recessable dial for washing setting. bought in france but believed similar available in uk at the time.

    June 1, 2006 at 5:34 pm #177932
    iadom
    Moderator

    Re: Ariston AVSL 100X, 2 + key flashing error code

    Difficult to ID a comparable UK model, nearest fault codes are lights 1 + 3 flashing F10, pressure switch not sensing.

    Could be partial blockage in pressure hose, faulty pressure switch, faulty control module or a combination of these. (plus a few others) The fact that you have to switch off at the mains does suggest a module fault though.

    The Indesit electronics used in these machines are renowned for their vagaries, it can often mean a slow and frustrating process of elimination, with the mains plug removed of course. :zap:

    June 6, 2006 at 10:31 pm #177933
    uk_sojourn
    Participant

    Re: Ariston AVSL 100X, 2 + key flashing error code

    Hi, I have checked the pressure switch and the hose and the blow through easy/ click with ease. I had that sinking expensive feeling when
    I noticed the unplugging bit. Right, now I need to find a french parts supplier…. Thank you for your time.

    Is there a UK equivalent model with a time delay start circiut on it? The french have set time bands of cheap electric, hence the delay start programing.

    June 7, 2006 at 7:29 am #177934
    Martin
    Participant

    Re: Ariston AVSL 100X, 2 + key flashing error code

    uk_sojourn wrote:Is there a UK equivalent model with a time delay start circiut on it?

    June 7, 2006 at 12:38 pm #177935
    uk_sojourn
    Participant

    Re: Ariston AVSL 100X, 2 + key flashing error code

    LOL yes but wheres the profit in that? what no indicit electronics.. cant possibly put that on the market! never sell! needs led’s, laser show, LCD, bluetooth, wifi, speed cameras and a public enquiry! LOL Cheers.

  • Author
    Posts
Viewing 7 posts - 1 through 7 (of 7 total)
  • You must be logged in to reply to this topic.