Zanussi ZSF6160 DISHWASHER

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Zanussi ZSF6160 DISHWASHER

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • May 30, 2006 at 7:08 pm #18159
    Robbiebegg
    Participant

    Hi
    Here is another dishwasher but with electronic front panel, I can’t get heater to work, element tests okay but no power. What controls heater on this model is it an NTC or stat? Any help welcome.

    May 30, 2006 at 9:11 pm #177962
    Dave_Conway
    Participant

    Re: Zanussi ZSF6160 DISHWASHER

    Diagnostics on the way 😀

    As you’re using Hotmail, check your spam folder if it doesn’t appear in your inbox, for some reason they quite often flag UKW emails as spam 😕

    Dave.

    May 31, 2006 at 7:06 am #177963
    Robbiebegg
    Participant

    Re: Zanussi ZSF6160 DISHWASHER

    Thanks Dave wish I had found this site years ago.

    June 1, 2006 at 9:02 am #177964
    bendaireboy
    Participant

    Re: Zanussi ZSF6160 DISHWASHER

    check the pcb coz the relay to board joint fails bit of solder and of we go i’m sure there’s a thread to this Dave but can’t fint it 🙂

    June 1, 2006 at 7:57 pm #177965
    Robbiebegg
    Participant

    Re: Zanussi ZSF6160 DISHWASHER

    Was back at machine today and ran the test program you sent me Dave and seems to not taking enough water in, solinoid opens for 20 seconds and thats it, according to manual it should open for 60 seconds and should cut out when pressure switch closes. I have checked water supply, pressure switch, pipework etc all fine. Checked filter in bottom and sump but no blockages. I have taken it back to workshop see if I can find problem.

    June 7, 2006 at 7:58 am #177966
    Robbiebegg
    Participant

    Re: Zanussi ZSF6160 DISHWASHER

    Thanks for help it was solder joint on main board, resoldered and machine working fine. Thanks again.

  • Author
    Posts
Viewing 6 posts - 1 through 6 (of 6 total)
  • You must be logged in to reply to this topic.