Tricity/Bendix Cooker SI505W

Home Forums Trade Technical & Spare Parts Forums Trade Technical Enquiries Tricity/Bendix Cooker SI505W

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • #18241
    Bryan
    Participant

    Main oven thermostat is 3111622027 but Masterpart have sent me 506008303006 as an alternative :roll:.
    This is a totally different stat and can anyone confirm that this is in fact interchangeable.

    The existing 46THC15/F5 Diamond H stat has an auxilliary set of contacts marked 2 and 6 as usual , for keeping the fan and lamp running presumably.

    The replacement stat (ET52) has 3 contacts marked A , B and C , of which A seems to be common , B switching element and presumably C switching fan and lamp.

    Anyone had experience of this and are my assumptions correct ❓ because it`s a new one to me.

    Thanks and sorry I know it`s Friday evening but I`m doing this tomorrow morning.

    Bryan

    #178282
    Dave_Conway
    Participant

    Re: Tricity/Bendix Cooker SI505W

    I don’t think it will fit to be honest, I’ve had several Masterpart “alternatives” of late that are completely incorrect, this is another 🙁

    3111622027 has not been superseded according to Electrolux 😉

    Dave.

    #178283
    Bryan
    Participant

    Re: Tricity/Bendix Cooker SI505W

    Thanks Dave , on Connect website both the above part numbers also come up as the same thermostat although the picture is different from the stat Masterpart have supplied :roll:.

    Decided to give it a go and after a bit of wiring and connection changes it seems to be working ok :D. Told customer to keep a close eye on it the next couple of times it`s used.

    This was actually my first ever repairs@ job and would have been nice and straight forward if the original stat had been supplied.

    Bryan

Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.