Ariston LSI 61 ( LSI2E2500 )

Home › Forums › Public Support Forums › Help And Support › Dishwasher Help Forum › Ariston LSI 61 ( LSI2E2500 )

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • June 8, 2006 at 12:33 pm #18361
    Kielykid64
    Participant

    Hi All ,
    This DW will give me a pilot light for the on/off switch , but there is no LED lighting of the 4 to select the programme . there are two boards on the facia one main PCB and a small for the selection checked for dry-joints but no sign of any .

    Thanks .

    Maurice

    June 8, 2006 at 2:08 pm #178738
    gegsy
    Participant

    Re: Ariston LSI 61 ( LSI2E2500 )

    I bet, if you open door with on/off switch in the on position; you then proceed to push the “P” button continuosly whilst turning on/off swutch to the off position, the prog LEds will chase then fade??
    With the power off :plug: I would look in base for water ingress, causing earth leakage to re-circulation motor. Dry it out as best you can and leave it to dry out for a few days or gently use hairdryer on said motor.

    Greg

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.