help with zanussi wahing machine problem

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › help with zanussi wahing machine problem

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • June 8, 2006 at 1:57 pm #18365
    lyndy
    Participant

    problem with zanussi f 1245w washing machine plus other zanussi washing machine models
    the machine goes through wash programme as normal with normal drum action.
    then tries to go through spin cycle it tries for four times but will not go to final spin.
    checked taco on motor and its 180ohms, pressure switch ok,pressure chamber not blocked.
    motor brushes ok .
    any suggestions??????

    June 8, 2006 at 2:03 pm #178749
    gegsy
    Participant

    Re: help with zanussi wahing machine problem

    Hi
    Dry joint on PCB? worth alook

    Greg

    June 9, 2006 at 3:20 pm #178750
    Alanj
    Participant

    Re: help with zanussi wahing machine problem

    Hi Lyndy,

    if it isn’t an out of balance load that’s causing the problem it’s usually the timer.I think EMW do a reconditioned timer £39.90 + vat. If it’s not the timer you can return it for £5.87. http://www.emwelec.co.uk

    Alan

    June 9, 2006 at 3:49 pm #178751
    Tubs
    Participant

    Re: help with zanussi wahing machine problem

    Timer,
    :tup:

    I’ve had a few of these.

    Steve

    June 10, 2006 at 9:58 am #178752
    TRICKY-D
    Participant

    Re: help with zanussi wahing machine problem

    Check to see if it will spin on a short spin cycle, if it does im pretty sure that it will be a time fault, ive had dozens of these.

    Rich

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.