Servis Easi Logic 1500 – something in drum

Home › Forums › Public Support Forums › Help And Support › Washing Machine Help Forum › Servis Easi Logic 1500 – something in drum

Viewing 8 posts - 1 through 8 (of 8 total)
  • Author
    Posts
  • June 11, 2006 at 10:22 am #18412
    Bargainhunter
    Participant

    I appear to have something metalic stuck between the drums which makes a fearful racket when on fast spin. What’s the best way to try and get it out?

    June 11, 2006 at 3:12 pm #178919
    kwatt
    Keymaster

    Hi,

    No easy answers to that one I’m afraid. Obviously the first thing to do is to get the power off before you go near it.

    The only routes into the tub is through the heater and through the sump hose. Beyond that it’s a total stripdown to get in there I’m afraid and that’s not a two minute job.

    Can’t help much further, nor can anyone else without a pukka model number.

    K.

    June 12, 2006 at 8:03 am #178920
    Bargainhunter
    Participant

    Re: Servis Easi Logic 1500 – something in drum

    Sorry about not supplying the model number, I thought the Easi Logic 1500 bit was it.

    On the sticky label inside the door it says Servis M6050W, hopefully that’s it.

    Looking forward to hearing again.

    Many thanks

    June 12, 2006 at 11:10 am #178921
    Goatboy
    Participant

    Re: Servis Easi Logic 1500 – something in drum

    Bargainhunter? I suppose that’s why you bought a Servis? 😛 Sorry!

    Are you sure that the drum support/bearings are ok? Open the door. Is there lateral movement on the inner drum, within the outer tub?

    June 12, 2006 at 3:14 pm #178922
    Bargainhunter
    Participant

    Re: Servis Easi Logic 1500 – something in drum

    Thanks for the info. Had a look at the drum, no significant movement as far as I can tell. Just did a test spin and all went smoothly and quietly until suddenly it was if someone had throw some nuts and bolts in the drum. After a few seconds of this all went quiet again and it finished the spin without incident.

    Good or bad news?

    Thanks again.

    June 12, 2006 at 8:49 pm #178923
    Goatboy
    Participant

    Re: Servis Easi Logic 1500 – something in drum

    That does sound like a foriegn body, in the tub/pump 🙁

    June 13, 2006 at 12:40 pm #178924
    Bargainhunter
    Participant

    Re: Servis Easi Logic 1500 – something in drum

    Thanks for the info. Any ideas on the way to get it out?

    Thanks again.

    June 13, 2006 at 11:14 pm #178925
    Penguin45
    Participant

    kwatt wrote:The only routes into the tub is through the heater and through the sump hose. Beyond that it’s a total stripdown to get in there

    The total stripdown bit involves removing the back panel and inner drum. How brave are you?

    Regards,
    Penguin45.

  • Author
    Posts
Viewing 8 posts - 1 through 8 (of 8 total)
  • You must be logged in to reply to this topic.