- This topic has 11 replies, 5 voices, and was last updated 19 years, 9 months ago by
.
-
Posts
-
GOT AN ZANUSSI FJR1545W WHEN I PROGRAM IT NO MATTER WHAT SETTING ALL I GET after i press start is the display turns to 3 then the machine pumps the drum rotates for a second or two then after about 3 mins it stops with the door locked and remians that way for another few minutes till it opens entered diag mode and got e84??
Re: ZANUSSI FJR1454W
E84 is the triac on the main PCB that controls the circulation pump at fault.
New board is the only solution according to the tech info 🙁
Unless you can trace the triac back of course 😉
Dave.
Re: ZANUSSI FJR1454W
Cant seem to find a faulty triac all the ones i have cheched seem to be fine any hints on where it is?
Re: ZANUSSI FJR1454W
If you trace back the connection from the wash pump to the board, I think you will find the Triac terminates at terminal J1-1) ❓
Re: ZANUSSI FJR1454W
ta lads but have now replaced the triac at j1 1 and still the same thing machine programs then when start is pressed the countdown timer says 3 mins and if i check diagnostic it tells me e84??
this one has got me stumped at the minuteRe: ZANUSSI FJR1454W
come on then dave any ideas as to a price or is it finally going to that white goods mountain in the sky?
Re: ZANUSSI FJR1454W
I too had a similar problem,, like funky says CHECK recirc pump. The one I went too had windings shorted with burn marks on its cover.
Re: ZANUSSI FJR1454W
THE RECIRC PUMP looks fine and i can hear a pump running i have not binned it yet cos i really wanna solve this one so i will give it another bash i will check the pump but it will probably be weds before i get the chance
any more ideas in the mean time woulld be great and if i i fix it i will let you know:)
- You must be logged in to reply to this topic.