hotpoint bf162 [indesit] dishwasher

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › hotpoint bf162 [indesit] dishwasher

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • June 29, 2006 at 6:28 pm #18803
    effzedarr
    Participant

    the dishwasher has filled its base tray with water,soaked the motor aswell, but before a new motor is fitted where has the water leaked from? this has the single over-flow pipe that seems to run from the centre of the sump /tub not the earlier twin pipe affair that went to the door well. any help much welcome..

    June 29, 2006 at 7:37 pm #180479
    iadom
    Moderator

    Re: hotpoint bf162 [indesit] dishwasher

    I have seen several causes of leaks, had one today that was the circulation pump itself leaking, have also seen hoses adrift, leaks from around the sump chamber ( an absolute pain to replace ).
    Also using 3 in 1 or 4 in 1 tablets can cause over foaming and flood the base.

    June 29, 2006 at 7:47 pm #180480
    funkyboogy
    Participant

    Re: hotpoint bf162 [indesit] dishwasher

    also collar under the spray arm comes loose…
    ally

    June 29, 2006 at 9:19 pm #180481
    bobokines
    Participant

    Re: hotpoint bf162 [indesit] dishwasher

    A Hotpoint buddy of mine tells me that there is now a Technical Bulletin about this. Something about the length of the door seal????

    Anybody have a copy so we can all have a look?

    Bob

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.