aeg santo

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › aeg santo

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • June 30, 2006 at 4:49 pm #18829
    stu123
    Participant

    anyone got expearence with these fridges its fully iced up not sure if its sensor prom cant get any info out of electrolux help appriecated mod 3688-6ka prod 927717621cheers in advance. stu

    July 14, 2007 at 11:06 am #180550
    Simon46
    Participant

    Re: aeg santo

    Ive got the same with huge clear iceblock down centre ducting on back wall of this larder fridge which has grown over the shelves. Any ideas on what to look at?

    Regards
    S.

    July 14, 2007 at 2:42 pm #180551
    smartin
    Participant

    Re: aeg santo

    i had 1 of these last week not displaying the usual square error codes in window, ordered a thermistor kit fitted it no difference,on my return i found that the cooling fan only worked for a few seconds then turned off, checked fan motor all ok so ordered a pcb and fan then stayed on, but i will say i have had a few of these with thermistor failures hope this helps smartin

    July 15, 2007 at 8:33 am #180552
    Simon46
    Participant

    Re: aeg santo

    The ones you have seen with thermistor failures did they have the iceblock at the rear? This one has no square flashing in display and the fan appears to run and defrost drain not blocked.

    Regards
    S.

    July 15, 2007 at 8:33 pm #180553
    stu123
    Participant

    Re: aeg santo

    sensor kit cured the problem i had fully iced up at back

    July 16, 2007 at 8:45 am #180554
    Simon46
    Participant

    Re: aeg santo

    Is the doorseal also able to be fitted without replacing entire door? Which appears to be NLA.

    Regards
    S.

  • Author
    Posts
Viewing 6 posts - 1 through 6 (of 6 total)
  • You must be logged in to reply to this topic.