- This topic has 3 replies, 2 voices, and was last updated 19 years, 9 months ago by
.
-
Posts
-
Hi, Hope someone can help. After main wash, and as it starts to fill on the first rince, the programme aborts. Door lock light flashes and Easy Iron & Rapid lights come on. Machine fills and drains correctly. I first thought it was an out of balance problem, but it doen’t seem to be. Cant find any mention of this model in the known fault code section. HEEEELP.
GTRe: Ariston A1636S Fault Code
It has EVO2 controls so they are the same codes for the Indesit WIDL series on page three of the known error codes (near the bottom) 😀
Dave.
Re: Ariston A1636S Fault Code
Sorry if i’m being a bit thick, but this machine doesn’t have a countable flashing light, or if it has, i’m too slow to count it. I asume the two illuminated lights are the fault code, but I don’t know what they mean.
Regards
Thicko GTRe: Ariston A1636S Fault Code
Ah, the flashing bit may be wrong in that case, yes the lights are the fault code, count them as 1-4 from left to right then it’ll make more sense 🙂
f01 light 4, motor triac
f02 light 3 motor, jammed/ tacho
f03 lights 3&4 Ntc fault
f04 light 2. pressure sw stuck on empty
f05 lights 2&4, pressure sw stuck on full
f06 lights 2&3, N/A?
f07 lights 2&3&4 heater relay
f08 light 1. heater relay
f09 lights 1&4 eprom/setup error
f10 lights 1&3, pressure switch not sensing
f11 lights 1&3&4, pump/draining error
f12 lights 1&2, communication error
f13 lights 1&2&4, dryer ntc/ fan motor
f14 lights 1&2&3, dryer heater
f15 lights 1&2&3&4, dryer heater relay
f16 N/A
f17 light 4, door lock
f18 light 3 comms error (3 phase motor) power boardDave.
- You must be logged in to reply to this topic.