Loctite

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Loctite

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • July 8, 2006 at 9:06 am #18992
    bobokines
    Participant

    iadom wrote:
    PS. You did apply bearing loctite to the shaft and bearings, and also thread loctite to the pulley securing nut?

    What’s the general feeling about using Loctite on the bearings and drum pulleys?


    I have never used Loctite in nearly 20 years and never had a pulley come loose. (to my knowledge) 😉

    Bob

    July 8, 2006 at 10:07 am #181249
    kwatt
    Keymaster

    Never used it, never will. Cursed many that have though, including from factory.

    K.

    July 8, 2006 at 10:26 am #181250
    nigegt
    Participant

    Re: Loctite

    No never use it, makes the job worse second time round and i’m fed up with the odd pulley nut you have to get a chisel onto!

    Nige

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.