Whirlpool AWM 8123

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Whirlpool AWM 8123

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • July 11, 2006 at 12:44 pm #19079
    trainer
    Participant

    Hi, Called out to machine giving fault FH. No Fill. Found hot inlet hose kinked so replaced. Checked for hot and cold fill. ok and it is not syphoning. Customer rang back to say fault had returned called back and it ran ’till rinse cycle. Customer again rang saying it had gone again. But when she started it again it continued from where it had stopped ok. Any ideas please? Thanks. Rob

    July 11, 2006 at 1:42 pm #181647
    Dave_Conway
    Participant

    Re: Whirlpool AWM 8123

    Cold solenoid going open circuit when it gets hot would be my thoughts 🙂

    Dave.

    July 11, 2006 at 9:22 pm #181648
    trainer
    Participant

    Re: Whirlpool AWM 8123

    Thanks Dave. I’ll give it a go and let you know. Rob

    August 5, 2006 at 9:00 am #181649
    trainer
    Participant

    Re: Whirlpool AWM 8123

    Thanks for the info. Customer has not rung back so assume no news is good news! Thanks again

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.