Zanussi TCE7276W Condensor Dryer

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Zanussi TCE7276W Condensor Dryer

Viewing 8 posts - 1 through 8 (of 8 total)
  • Author
    Posts
  • July 13, 2006 at 8:22 am #19120
    Vladd
    Participant

    Can anyone help me ???
    I have a customer with the above model of dryer that doesn’t work on the H and J programs. When switched to the H or J program it goes straight to the cool-down and then ends. It works fine otherwise.
    I have tried changing the main module, heater block and the NTC probe. I’m at a loss as i can’t find anything else involved !!!!!

    July 13, 2006 at 8:48 am #181807
    Dave_Conway
    Participant

    Re: Zanussi TCE7276W Condensor Dryer

    If you post the PNC (several versions of this one) I should be able to get the diagnostics etc for you 🙂

    Dave.

    July 13, 2006 at 9:18 am #181808
    Vladd
    Participant

    We have the TDS off-line discs for the test programs. Unfortunatly the machine runs through the diognostic without bringing up a fault !!!
    PNC no is 916716804/00

    July 13, 2006 at 9:49 am #181809
    Dave_Conway
    Participant

    Re: Zanussi TCE7276W Condensor Dryer

    Ah, if you have TDS there’s probably not much more I have.

    Does it have the wiring diagram and 53 page service manual on there ?

    Dave.

    July 13, 2006 at 9:58 am #181810
    Vladd
    Participant

    Yes it does.

    Thanks for the help anyway.

    Has anyone else seen this problem before

    July 13, 2006 at 11:29 am #181811
    Martin
    Participant

    Vladd wrote:Has anyone else seen this problem before

    Sorry Vladd but I have not had this problem before but looking at the wiring diagram, I wonder if the connector block connection to the element is 100{e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d} ??

    H & J are the low heat cycles (and G too) so possibly the connection to and from the element may not be made and it goes into default as a result? We know the element and module are new, but what of the connections between them?

    Just a thought? 🙂

    July 13, 2006 at 3:37 pm #181812
    Vladd
    Participant

    Worth a try, t

    thanks for the pointer

    July 13, 2006 at 4:28 pm #181813
    ANDYVIVO
    Participant

    Re: Zanussi TCE7276W Condensor Dryer

    Try cleaning the drum with white vinegar, a slight patina can form and the electronics do not receive a true reading. You can also try adjusting the humidity sensor level (see user instructions)

    Regards Andy

  • Author
    Posts
Viewing 8 posts - 1 through 8 (of 8 total)
  • You must be logged in to reply to this topic.