AEG F8081W D/W

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › AEG F8081W D/W

Viewing 12 posts - 1 through 12 (of 12 total)
  • Author
    Posts
  • July 18, 2006 at 9:10 pm #19252
    iadom
    Moderator

    I have a call tomorrow on this dishwasher, complaint is that machine is dead, I will obviously check all the usual suspects but I wanted to have a look at the wiring diagram, however there doesn’t seem to be one on the TDS disc. Is there an equivalent Zanussi machine or is the an earlier model?

    July 18, 2006 at 9:17 pm #182389
    Penguin45
    Participant

    Re: AEG F8081W D/W

    Try F8081I-W – integrated version – diagrams are in documents list.

    Chris.

    July 18, 2006 at 10:02 pm #182390
    iadom
    Moderator

    Re: AEG F8081W D/W

    Thanks Chris. :tup:

    EDIT, just had another look at TDS. I did see all the documents listed on the lower window, no overall service info or wiring diagram that I can see.
    Just a load of service bulletins.

    July 18, 2006 at 11:15 pm #182391
    Penguin45
    Participant

    Re: AEG F8081W D/W

    Jim,
    G0W1000266 + 7 appear to be diagram and schematic.

    There is some service info, but it’s all in german, mein herr.

    Chris.

    July 19, 2006 at 8:56 am #182392
    iadom
    Moderator

    Re: AEG F8081W D/W

    Penguin45 wrote:Jim,
    G0W1000266 + 7 appear to be diagram and schematic.

    😕 Cannot see anything like that on my TDS, what or where is GOW1000266+7 . :clown:

    Just been to the machine, apparently worked fine on last wash, switched on for next wash, dead as a dodo. No warning of any problems beforehand.
    Door switch, small On/Off switch on module OK, I can trace a live & neutral link from the plug to the control module, there are no obvious signs of any damage to the module or the wiring harness.

    I cannot get the parts diagrams to display on either PC for this model and there is no GOW1000266+7 listed, only the parts lists themselves display.

    Anyone had a similar problem, or have a wiring diagram/schematic?

    July 19, 2006 at 9:07 am #182393
    Dave_Conway
    Participant

    Re: AEG F8081W D/W

    Did you grab the PNC while you were there Jim ?

    Dave.

    July 19, 2006 at 9:31 am #182394
    iadom
    Moderator

    Re: AEG F8081W D/W

    PNC was 91123221800, she gave me that before I went so I tried that as well on TDS.

    Jim.

    July 19, 2006 at 9:41 am #182395
    Dave_Conway
    Participant

    Re: AEG F8081W D/W

    A couple of snippets on the way 😉

    Dave.

    July 19, 2006 at 3:13 pm #182396
    iadom
    Moderator

    Re: AEG F8081W D/W

    Thanks Dave ( & Paul) 😉

    July 20, 2006 at 9:00 am #182397
    iadom
    Moderator

    Re: AEG F8081W D/W

    Anyone ( Dave ) 😉 know the price of the control module on these.
    Masterpart shows 8996461920101 as NLA, and does not recognise 8996461920119 ?

    July 20, 2006 at 9:24 am #182398
    Dave_Conway
    Participant

    Re: AEG F8081W D/W

    It shows two on the diagram, from Lux:

    PCB (9 buttons by the look of it) is 8996461920028 at £165.35

    PCB (3 buttons) is 8996461921422 at £170.31

    Both list price ex VAT 😯 😯

    July 20, 2006 at 9:56 am #182399
    iadom
    Moderator

    Re: AEG F8081W D/W

    I feared as much, a well, don’t think I will be trying one, on spec. 😆

  • Author
    Posts
Viewing 12 posts - 1 through 12 (of 12 total)
  • You must be logged in to reply to this topic.