Ariston A1636

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Ariston A1636

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • July 21, 2006 at 8:04 pm #19325
    cornwell40
    Participant

    A new neighbour has seen the van and given me a headache.
    I don’t know if I’m missing something obvious but his wife is driving me up the wall with her wittering while I’m trying to testit.

    Their complaint is that when it spins it leaks through the door.
    Fill, select spin and it gets a distribute to start but the pump only comes in when it begins to ramp up, full of water. Should it do that?
    P system clear but is the Pressure switch a single level one?

    Tony C

    July 21, 2006 at 8:26 pm #182635
    johnnyj
    Participant

    Re: Ariston A1636

    I’ll give you a clue check for colour catchers or smothing similar bye.

    July 21, 2006 at 8:32 pm #182636
    Bryan
    Participant

    Re: Ariston A1636

    Don`t know if this is of any use , but I had a similar fault on this model and rather embarrassingly it turned out to be a small sock in the sump hose filter causing slow drainage. Worth a close look because it fooled me for quite some time , you`d think it shouldn`t be able to get up enough speed with water still in it but this one did although the water came out the soap drawer.

    Bryan

    July 22, 2006 at 8:14 pm #182637
    Tony_EMW
    Participant

    Re: Ariston A1636

    Could be a board memory fault. We can “lend” you one for £5+vat (our handling charge if you have to return it having tried it in the machine) Tony EMW 0115 9652118

    July 24, 2006 at 8:46 am #182638
    cornwell40
    Participant

    Re: Ariston A1636

    Thanks all
    Cheers for the offer Tony, I may be taking you up on that. 🙂

    Tony C

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.