Bosch Dishwasher Element Short Circuit.

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Bosch Dishwasher Element Short Circuit.

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • July 26, 2006 at 7:46 pm #19462
    Twoten
    Participant

    I looked at a Bosch SGS59A22GB/17 that was tripping the main board.

    This was straight forward to diagnose as a short circuit element.

    Before I order the new element has anyone had this where its damaged the main control PCB?

    Thanks,

    Keith.

    July 26, 2006 at 8:01 pm #183237
    Martin
    Participant

    Re: Bosch Dishwasher Element Short Circuit.

    Twoten wrote:Before I order the new element

    The only way to be sure it hasn’t is to disconnect the feed to the heater, run the machine and see if you get 240volts to the terminals? If yes, the chances are the module is fine 🙂 😉

    July 26, 2006 at 8:20 pm #183238
    Twoten
    Participant

    Re: Bosch Dishwasher Element Short Circuit

    Thanks Martin,

    I know I should have done this at the time, but it was 5pm, a long hot day with another 3 calls to do, I didn’t think of checking the PCB. It wasn’t until after I left realised I should have done the obvious and check the PCB.

    Also the element wasn’t short circuit, it was a dead short to earth which is why it tripped the RCD.

    I’m just trying to ascertain the likelihood of the board being damaged?

    July 26, 2006 at 10:31 pm #183239
    gegsy
    Participant

    Re: Bosch Dishwasher Element Short Circuit.

    If its just earth leakage I would imagine PCB to be fine. Give it a quick viz over looking for the obvious blown track etc.

    Greg

    July 27, 2006 at 5:52 am #183240
    Twoten
    Participant

    Re: Bosch Dishwasher Element Short Circuit.

    Thanks for the advice,

    Keith.

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.