indesit dv620

Home › Forums › Public Support Forums › Help And Support › Dishwasher Help Forum › indesit dv620

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • July 27, 2006 at 2:56 am #19471
    twanky
    Participant

    help,after a power cut my dishwasher refuses to work .starting from a new cycle it fills with water and appears to go through a rinse cycle and stops.then the first two indicator lights (from the left) start to flash can anyone help?

    July 27, 2006 at 7:31 am #183307
    Dave_Conway
    Participant

    Re: indesit dv620

    Led’s 1+2 flashing is generally a draining error so check the waste hose/connections etc for blockages first 🙂

    Dave.

    August 5, 2006 at 2:56 pm #183308
    twanky
    Participant

    Dave_Conway wrote:Led’s 1+2 flashing is generally a draining error so check the waste hose/connections etc for blockages first 🙂

    Dave.

    thanks for your reply,hose is fine and water will drain out if hose is dropped below water level. could the problem be the pump or anything else associated with it

    August 5, 2006 at 3:37 pm #183309
    Dave_Conway
    Participant

    tsherman tanky wrote:could the problem be the pump or anything else associated with it

    Yep, more than likely. Power off when checking please :zap:

    If you need pro help, check the repairs@ link below 🙂

    Dave.

    August 11, 2006 at 6:56 pm #183310
    twanky
    Participant

    thanks dave ,checked pump seems fine (220 ohms resistance).is this where it gets costly? control boards e.t.c.

    August 11, 2006 at 7:13 pm #183311
    Penguin45
    Participant

    Re: indesit dv620

    Resistance is acceptable for a magnetic drain pump. Have you stripped it to check for free rotation and foreign objects?

    Mind the power…….

    Regards,
    Penguin45.

  • Author
    Posts
Viewing 6 posts - 1 through 6 (of 6 total)
  • You must be logged in to reply to this topic.