Hoover TV630 t/dryer

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Hoover TV630 t/dryer

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • July 27, 2006 at 11:29 am #19482
    andy2
    Participant

    Hi

    A search on connect mediator brings up a on/off switch AND a start switch listed for this model. Customer reckons that the switch used to latch in but the switch seems to me to be a start switch (non latching). There is also a relay on a small PCB behind the facia. Machine runs ok when the switch is held in except for a buzzing noise.

    Despite what the customer says it seems to me to be a relay problem (as on HPT t/dryers). But never had a hoover with this problem before. Also why are there two different switches listed for this model? Would appreciate any info.

    Thanks

    Andy 😀

    July 27, 2006 at 12:26 pm #183346
    Steven
    Participant

    Re: Hoover TV630 t/dryer

    Had a few of these it is usally the pcb with the relay on it, the switch is push start, customers usally say that switch used to stay in, but hey what do they know they only use every day.

    Steven

    July 27, 2006 at 4:21 pm #183347
    maltheviking
    Participant

    Re: Hoover TV630 t/dryer

    Got one of these at the moment, relay board 99{e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d} if the time

    Mal

    July 27, 2006 at 8:26 pm #183348
    andy2
    Participant

    Re: Hoover TV630 t/dryer

    OK – Thanks for the advice gents, i will get a relay and bung it in.

    Much appreciated.

    😀 Andy 😀

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.